By default, WiFi Scanner will scan every 5 seconds. This ensures that the user has up-to-date data as quickly as possible.


Testing Controls and Filters

The filter is very helpful when the user is trying to narrow down the results in a high-volume area. This feature can be utilized before, during, or after the current scan has been performed.

The results can be filtered by:

Simply enter the fields to be filtered and hit enter on the keyboard to activate the filter.

Remove the Filter by pressing the Filter button so that the filters disappear.

Quick Keys

1 Set Signal value to 10
2 Set Signal value to 20
3 Set Signal value to 30
4 Set Signal value to 40
5 Set Signal value to 50
6 Set Signal value to 60
7 Set Signal value to 70
8 Set Signal value to 80
9 Set Signal value to 90
0 Clear all fields in the Filter
q Set Signal value to 15
w Set Signal value to 25
e Set Signal value to 35
r Set Signal value to 45
t Set Signal value to 55
y Set Signal value to 65
u Set Signal value to 75
i Set Signal value to 85
o Set Signal value to 95
f Turn Filter on/off
g Turn Group Access Points on/off
c Cycle through the Channels
b Cycle through the Bands (Both, 2.4, and 5)
< Less Than Signal
> Greater Than Signal
Space Bar Stop Current Scan/Start New Scan